Prusament
Prusament rPLA Orange
Compare with 3 similar rPLA filaments →
Set your printer to see if this filament works with it.
Palette
4 colours
Pick a shade to preview it — open its page for full prices.
Live prices
Where to buy
Each storefront is shown with its region and currency.
Price history (USD, 38 days tracked)
- Today
- $29.40
- Lowest ever
- $29.402026-02-27
- Typical
- $29.40
Today's price matches the lowest we've tracked — a good time to buy.
Track it
Price-drop alert
Contribute
Know this filament's TD?
Technical data
Manufacturer specs, normalized
Key engineering values normalized into FilaScope's standard units.
- Tensile strength
- 49 MPa
- Tensile modulus
- 2100 MPa
- Elongation at break
- 3.1 %
- Impact strength
- 14 kJ/m²
- Flexural strength
- 82 MPa
- Density
- 1.24 g/cm³
Values normalized into standard units — see our methodology.
Specifications
Full specifications
Printing settings
- Nozzle temperature
- 210–220 °C
- Bed temperature
- 50–60 °C
- Part cooling fan
- 50–100 %
- Max print speed
- 200 mm/s
- High-speed capable
- No
Physical properties
- Diameter
- 1.75 mm
- Density
- 1.24 g/cm³
- Net weight
- 1000 g
- Pack quantity
- 1
- Finish
- Standard
Mechanical properties
- Tensile strength (XY)
- 49 MPa
- Tensile modulus (XY)
- 2100 MPa
- Bending modulus
- 3100 MPa
- Flexural strength
- 82 MPa
- Impact strength
- 14 kJ/m²
- Elongation at break (XY)
- 3.1 %
- Shore hardness (D)
- 80
Composition & special properties
- Abrasive (needs hardened nozzle)
- No
HueForge & optics
- Colour (hex)
- #DAA520
- Colour (CIELAB)
- L 71 · a 9 · b 69
Storage & care
- Moisture sensitivity
- low
- Drying temperature
- 45 °C
- Drying time
- 4 h
Scores & identifiers
- FilaScore
- 7.3
