Prusament
Prusament rPLA Green
Compare with 3 similar rPLA filaments →
Set your printer to see if this filament works with it.
Live prices
Where to buy
Each storefront is shown with its region and currency.
Price history (USD, 38 days tracked)
- Today
- $29.40
- Lowest ever
- $29.402026-02-27
- Typical
- $29.40
Today's price matches the lowest we've tracked — a good time to buy.
Track it
Price-drop alert
Contribute
Know this filament's TD?
Technical data
Manufacturer specs, normalized
Key engineering values normalized into FilaScope's standard units.
- Tensile strength
- 49 MPa
- Tensile modulus
- 2100 MPa
- Elongation at break
- 3.1 %
- Impact strength
- 14 kJ/m²
- Flexural strength
- 82 MPa
- Density
- 1.24 g/cm³
Values normalized into standard units — see our methodology.
Specifications
Full specifications
Printing settings
- Nozzle temperature
- 210–220 °C
- Bed temperature
- 50–60 °C
- Part cooling fan
- 50–100 %
- Max print speed
- 200 mm/s
- High-speed capable
- No
Physical properties
- Diameter
- 1.75 mm
- Density
- 1.24 g/cm³
- Net weight
- 1000 g
- Pack quantity
- 1
- Finish
- Standard
Mechanical properties
- Tensile strength (XY)
- 49 MPa
- Tensile modulus (XY)
- 2100 MPa
- Bending modulus
- 3100 MPa
- Flexural strength
- 82 MPa
- Impact strength
- 14 kJ/m²
- Elongation at break (XY)
- 3.1 %
- Shore hardness (D)
- 80
Composition & special properties
- Abrasive (needs hardened nozzle)
- No
HueForge & optics
- Colour (hex)
- #723D14
- Colour (CIELAB)
- L 32 · a 20 · b 34
Storage & care
- Moisture sensitivity
- low
- Drying temperature
- 45 °C
- Drying time
- 4 h
Scores & identifiers
- FilaScore
- 7.3