Polymaker
Polymaker PLA Metallic
Compare with 3 similar PLA filaments →
Set your printer to see if this filament works with it.
Palette
33 colours
Pick a shade to preview it — open its page for full prices.
Live prices
Where to buy
Each storefront is shown with its region and currency.
Price history (USD, 36 days tracked)
- Today
- $24.99
- Lowest ever
- $24.992026-06-17
- Typical
- $27.99
Today's price matches the lowest we've tracked — a good time to buy.
Track it
Price-drop alert
Contribute
Know this filament's TD?
Technical data
Manufacturer specs, normalized
Key engineering values normalized into FilaScope's standard units.
- Glass transition
- 61 °C
- HDT @0.45 MPa
- 59 °C
- HDT @1.8 MPa
- 58 °C
- Tensile strength
- 52.3 MPa
- Elongation at break
- 6.3 %
- Flexural strength
- 86.9 MPa
- Density
- 1.17 g/cm³
- Melt flow index
- 7 g/10min
Values normalized into standard units — see our methodology.
Specifications
Full specifications
Printing settings
- Nozzle sweet spot
- 210 °C
- High-speed capable
- No
- Retraction length
- 0.8 mm
- Retraction speed
- 30 mm/s
Physical properties
- Diameter
- 1.75 mm
- Density
- 1.17 g/cm³
- Net weight
- 1000 g
- Pack quantity
- 1
- Finish
- Metallic
Mechanical properties
- Tensile strength (XY)
- 52.3 MPa
- Bending modulus
- 3230.9 MPa
- Flexural strength
- 86.9 MPa
- Elongation at break (XY)
- 6.3 %
Thermal properties
- Glass transition (Tg)
- 61 °C
- HDT @ 0.45 MPa
- 59 °C
- HDT @ 1.8 MPa
- 58 °C
- Vicat softening
- 62 °C
- Melt temperature
- 150 °C
- Melt flow index
- 7 g/10min
Composition & special properties
- Abrasive (needs hardened nozzle)
- No
- Water absorption
- 0.51 %
HueForge & optics
- TD confidence
- low
- TD source
- filament-pass
- Colour (hex)
- #CCA682
- Colour (CIELAB)
- L 71 · a 9 · b 24
Storage & care
- Moisture sensitivity
- low
- Drying temperature
- 40 °C
- Drying time
- 4 h
- Moisture care
- Store in dry box. Dry at 40°C for 4h if brittle.
Scores & identifiers
- SKU
- PA13028
- MPN
- PA13028
