Polymaker
Polymaker™ PETG - Yellow
Compare with 3 similar PETG filaments →
Set your printer to see if this filament works with it.
Palette
27 colours
Pick a shade to preview it — open its page for full prices.
Live prices
Where to buy
Each storefront is shown with its region and currency.
Price history (USD, 45 days tracked)
- Today
- $19.99
- Lowest ever
- $16.992026-05-07
- Typical
- $23.99
Today's price is 17% below typical.
Track it
Price-drop alert
Contribute
Know this filament's TD?
Technical data
Manufacturer specs, normalized
Key engineering values normalized into FilaScope's standard units.
- Glass transition
- 71.24 °C
- HDT @0.45 MPa
- 69 °C
- HDT @1.8 MPa
- 65 °C
- Tensile strength
- 47.96 MPa
- Elongation at break
- 9.33 %
- Flexural strength
- 80.08 MPa
- Density
- 1.3 g/cm³
- Melt flow index
- 16.3 g/10min
Values normalized into standard units — see our methodology.
Specifications
Full specifications
Printing settings
- Nozzle sweet spot
- 235 °C
- High-speed capable
- No
- Retraction length
- 1 mm
- Retraction speed
- 30 mm/s
Physical properties
- Diameter
- 1.75 mm
- Density
- 1.3 g/cm³
- Net weight
- 1000 g
- Pack quantity
- 1
- Finish
- Standard
Mechanical properties
- Tensile strength (XY)
- 47.96 MPa
- Bending modulus
- 2277.34 MPa
- Flexural strength
- 80.08 MPa
- Elongation at break (XY)
- 9.33 %
Thermal properties
- Glass transition (Tg)
- 71.24 °C
- HDT @ 0.45 MPa
- 69 °C
- HDT @ 1.8 MPa
- 65 °C
- Vicat softening
- 75 °C
- Melt temperature
- 220 °C
- Melt flow index
- 16.3 g/10min
Composition & special properties
- Abrasive (needs hardened nozzle)
- No
- Water absorption
- 0.51 %
HueForge & optics
- TD confidence
- low
- TD source
- filament-pass
- Colour (hex)
- #C39A75
- Colour (CIELAB)
- L 67 · a 10 · b 25
Storage & care
- Moisture sensitivity
- moderate
- Drying temperature
- 65 °C
- Drying time
- 6 h
- Moisture care
- Hygroscopic. Dry at 65°C for 6h before use.
Scores & identifiers
- FilaScore
- 7.6
- SKU
- PB01019
