Polymaker
Polymaker LW-PLA Green
Compare with 3 similar LW-PLA filaments →
Set your printer to see if this filament works with it.
Palette
8 colours
Pick a shade to preview it — open its page for full prices.
Live prices
Where to buy
Each storefront is shown with its region and currency.
Price history (USD, 39 days tracked)
- Today
- $29.99
- Lowest ever
- $29.992026-06-17
- Typical
- $40.99
Today's price matches the lowest we've tracked — a good time to buy.
Track it
Price-drop alert
Contribute
Know this filament's TD?
Technical data
Manufacturer specs, normalized
Key engineering values normalized into FilaScope's standard units.
- Glass transition
- 58.7 °C
- HDT @0.45 MPa
- 54 °C
- HDT @1.8 MPa
- 50 °C
- Tensile strength
- 24.4 MPa
- Elongation at break
- 8.8 %
- Flexural strength
- 50.2 MPa
- Density
- 0.6 g/cm³
- Melt flow index
- 9.21 g/10min
Values normalized into standard units — see our methodology.
Specifications
Full specifications
Printing settings
- Nozzle temperature
- 220–260 °C
- Bed temperature
- 45–60 °C
- Part cooling fan
- 0–50 %
- High-speed capable
- No
Physical properties
- Diameter
- 1.75 mm
- Density
- 0.6 g/cm³
- Net weight
- 1000 g
- Pack quantity
- 1
- Finish
- Standard
Mechanical properties
- Tensile strength (XY)
- 24.4 MPa
- Bending modulus
- 1958.9 MPa
- Flexural strength
- 50.2 MPa
- Elongation at break (XY)
- 8.8 %
Thermal properties
- Glass transition (Tg)
- 58.7 °C
- HDT @ 0.45 MPa
- 54 °C
- HDT @ 1.8 MPa
- 50 °C
- Vicat softening
- 60 °C
- Melt temperature
- 150.8 °C
- Melt flow index
- 9.21 g/10min
Composition & special properties
- Abrasive (needs hardened nozzle)
- No
- Water absorption
- 0.4 %
HueForge & optics
- TD confidence
- high
- TD source
- tds_pdf
- Colour (hex)
- #EABD8D
- Colour (CIELAB)
- L 80 · a 10 · b 30
Storage & care
- Moisture sensitivity
- low
Scores & identifiers
- FilaScore
- 7.9
- SKU
- PA08008
