AzureFilm
PETG - Black Muster
OpaqueLight-pipe
Compare with 3 similar PETG filaments →
Set your printer to see if this filament works with it.
Palette
4 colours
Pick a shade to preview it — open its page for full prices.
Black Muster
View Black Muster →Live prices
Where to buy
Each storefront is shown with its region and currency.
No direct store link tracked for this product yet.
Technical data
Manufacturer specs, normalized
Key engineering values normalized into FilaScope's standard units.
- Density
- 1.27 g/cm³
Values normalized into standard units — see our methodology.
Specifications
Full specifications
Printing settings
- Nozzle temperature
- 220–250 °C
- Nozzle sweet spot
- 235 °C
- Bed temperature
- 60–85 °C
- Part cooling fan
- 20–50 %
- Max print speed
- 150 mm/s
- High-speed capable
- No
- Retraction length
- 1 mm
- Retraction speed
- 30 mm/s
Physical properties
- Diameter
- 1.75 mm
- Density
- 1.27 g/cm³
- Pack quantity
- 1
- Finish
- Standard
Thermal properties
- Melt temperature
- 220 °C
Composition & special properties
- Abrasive (needs hardened nozzle)
- No
HueForge & optics
- TD (transmission distance)
- 2.5
- TD confidence
- low
- TD source
- filament-pass
- Colour (hex)
- #1A1A1A
- Colour (CIELAB)
- L 9 · a 0 · b 0
Storage & care
- Moisture sensitivity
- high
- Drying temperature
- 65 °C
- Drying time
- 6 h
- Moisture care
- Hygroscopic. Dry at 65°C for 6h before use.
Scores & identifiers
- FilaScore
- 2.9
