ColorFabb
colorFabb PETG Economy — RED (1.75mm, 750g)
OpaqueLight-pipe
Compare with 3 similar PETG filaments →
Set your printer to see if this filament works with it.
Palette
6 colours
Pick a shade to preview it — open its page for full prices.
Live prices
Where to buy
Each storefront is shown with its region and currency.
Price history (USD, 26 days tracked)
- Today
- $19.24
- Lowest ever
- $19.242026-04-29
- Typical
- $19.24
Today's price matches the lowest we've tracked — a good time to buy.
Technical data
Manufacturer specs, normalized
Key engineering values normalized into FilaScope's standard units.
- Density
- 1.27 g/cm³
Values normalized into standard units — see our methodology.
Specifications
Full specifications
Printing settings
- Nozzle temperature
- 230–250 °C
- Bed temperature
- 70–90 °C
- Part cooling fan
- 20–50 %
- Max print speed
- 150 mm/s
- High-speed capable
- No
- Retraction length
- 1 mm
- Retraction speed
- 30 mm/s
Physical properties
- Diameter
- 1.75 mm
- Density
- 1.27 g/cm³
- Net weight
- 750 g
- Pack quantity
- 1
- Finish
- Standard
Thermal properties
- Melt temperature
- 230 °C
Composition & special properties
- Abrasive (needs hardened nozzle)
- No
HueForge & optics
- TD (transmission distance)
- 2.5
- TD confidence
- low
- TD source
- filament-pass
- Colour (hex)
- #AC8B6D
- Colour (CIELAB)
- L 60 · a 8 · b 21
Storage & care
- Moisture sensitivity
- high
- Drying temperature
- 65 °C
- Drying time
- 6 h
- Moisture care
- Hygroscopic. Dry at 65°C for 6h before use.
Scores & identifiers
- SKU
- 040010
