FormFutura
FormFutura PLA+ Natural
OpaqueLight-pipe
Compare with 3 similar PLA+ filaments →
Set your printer to see if this filament works with it.
Palette
6 colours
Pick a shade to preview it — open its page for full prices.
Live prices
Where to buy
Each storefront is shown with its region and currency.
Price history (USD, 30 days tracked)
- Today
- $28.56
- Lowest ever
- $28.562026-04-22
- Typical
- $28.56
Today's price matches the lowest we've tracked — a good time to buy.
Technical data
Manufacturer specs, normalized
Key engineering values normalized into FilaScope's standard units.
- Density
- 1.24 g/cm³
Note: the linked document is a general manufacturer document, not a per-product technical data sheet.
Values normalized into standard units — see our methodology.
Specifications
Full specifications
Printing settings
- Nozzle temperature
- 195–220 °C
- Nozzle sweet spot
- 215 °C
- Bed temperature
- 50–60 °C
- High-speed capable
- No
- Retraction length
- 0.8 mm
- Retraction speed
- 30 mm/s
Physical properties
- Diameter
- 1.75 mm
- Density
- 1.24 g/cm³
- Net weight
- 750 g
- Pack quantity
- 1
- Finish
- Standard
- Spool material
- Plastic
Thermal properties
- Melt temperature
- 200 °C
Composition & special properties
- Abrasive (needs hardened nozzle)
- No
HueForge & optics
- TD (transmission distance)
- 1.5
- TD confidence
- low
- TD source
- filament-pass
- Colour (hex)
- #F0E6D2
- Colour (CIELAB)
- L 92 · a 0 · b 11
Storage & care
- Drying temperature
- 40 °C
- Drying time
- 4 h
