DURAMIC 3D
DURAMIC 3D TPU Red
OpaqueLight-pipe
Compare with 3 similar TPU filaments →
Set your printer to see if this filament works with it.
Palette
7 colours
Pick a shade to preview it — open its page for full prices.
Live prices
Where to buy
Each storefront is shown with its region and currency.
No direct store link tracked for this product yet.
Price history (USD, 36 days tracked)
- Today
- $24.99
- Lowest ever
- $24.992026-04-21
- Typical
- $24.99
Today's price matches the lowest we've tracked — a good time to buy.
Technical data
Manufacturer specs, normalized
Key engineering values normalized into FilaScope's standard units.
- Density
- 1.2 g/cm³
Values normalized into standard units — see our methodology.
Specifications
Full specifications
Printing settings
- Nozzle temperature
- 210–240 °C
- Nozzle sweet spot
- 225 °C
- Bed temperature
- 25–60 °C
- Part cooling fan
- 0–30 %
- Max print speed
- 30 mm/s
- Retraction length
- 2 mm
- Retraction speed
- 25 mm/s
Physical properties
- Diameter
- 1.75 mm
- Density
- 1.2 g/cm³
- Pack quantity
- 1
Thermal properties
- Melt temperature
- 210 °C
Composition & special properties
- Abrasive (needs hardened nozzle)
- No
HueForge & optics
- TD (transmission distance)
- 2
- TD confidence
- low
- TD source
- filament-pass
- Colour (hex)
- #D32F2F
- Colour (CIELAB)
- L 47 · a 62 · b 41
Storage & care
- Moisture sensitivity
- very_high
- Drying temperature
- 50 °C
- Drying time
- 4 h
- Moisture care
- Very hygroscopic. Dry at 50°C for 4h. Store sealed.
