Bambu Lab
Bambu Lab ABS-GF — Yellow (1kg)
OpaqueLight-pipe
Compare with 3 similar ABS filaments →
Set your printer to see if this filament works with it.
Palette
8 colours
Pick a shade to preview it — open its page for full prices.
Live prices
Where to buy
Each storefront is shown with its region and currency.
Technical data
Manufacturer specs, normalized
Key engineering values normalized into FilaScope's standard units.
- Glass transition
- 10 °C
- Tensile strength
- 36 MPa
- Tensile modulus
- 3160 MPa
- Elongation at break
- 6.3 %
- Flexural strength
- 68 MPa
- Density
- 1.08 g/cm³
- Melt flow index
- 7.56 g/10min
Note: the linked document is a general manufacturer document, not a per-product technical data sheet.
Values normalized into standard units — see our methodology.
Specifications
Full specifications
Printing settings
- Nozzle temperature
- 240–280 °C
- Bed temperature
- 80–100 °C
- Part cooling fan
- 0–80 %
- Max print speed
- 180 mm/s
- High-speed capable
- No
- Recommended nozzle
- hardened steel
Physical properties
- Diameter
- 1.75 mm
- Density
- 1.08 g/cm³
- Net weight
- 1000 g
- Pack quantity
- 1
- Finish
- Standard
Mechanical properties
- Tensile strength (XY)
- 36 MPa
- Tensile modulus (XY)
- 3160 MPa
- Bending modulus
- 2860 MPa
- Flexural strength
- 68 MPa
- Elongation at break (XY)
- 6.3 %
Thermal properties
- Glass transition (Tg)
- 10 °C
- Melt temperature
- 202 °C
- Melt flow index
- 7.56 g/10min
Composition & special properties
- Glass fiber content
- 15 %
- Abrasive (needs hardened nozzle)
- Yes
HueForge & optics
- TD (transmission distance)
- 3
- TD confidence
- high
- TD source
- tds_pdf
- Colour (hex)
- #F2DC3B
- Colour (CIELAB)
- L 87 · a −9 · b 76
Storage & care
- Drying temperature
- 80 °C
- Drying time
- 8 h
Scores & identifiers
- FilaScore
- 85
- SKU
- 45758386602224
- MPN
- 41400