Bambu Lab
Bambu Lab ABS-GF — Green (1kg)
OpaqueLight-pipe
Compare with 3 similar ABS filaments →
Set your printer to see if this filament works with it.
Palette
8 colours
Pick a shade to preview it — open its page for full prices.
Green
View Green →Live prices
Where to buy
Each storefront is shown with its region and currency.
Technical data
Manufacturer specs, normalized
Key engineering values normalized into FilaScope's standard units.
- Glass transition
- 10 °C
- Tensile strength
- 36 MPa
- Tensile modulus
- 3160 MPa
- Elongation at break
- 6.3 %
- Flexural strength
- 68 MPa
- Density
- 1.08 g/cm³
- Melt flow index
- 7.56 g/10min
Note: the linked document is a general manufacturer document, not a per-product technical data sheet.
Values normalized into standard units — see our methodology.
Specifications
Full specifications
Printing settings
- Nozzle temperature
- 240–280 °C
- Bed temperature
- 80–100 °C
- Part cooling fan
- 0–80 %
- Max print speed
- 180 mm/s
- High-speed capable
- No
- Recommended nozzle
- hardened steel
Physical properties
- Diameter
- 1.75 mm
- Density
- 1.08 g/cm³
- Net weight
- 1000 g
- Pack quantity
- 1
- Finish
- Standard
Mechanical properties
- Tensile strength (XY)
- 36 MPa
- Tensile modulus (XY)
- 3160 MPa
- Bending modulus
- 2860 MPa
- Flexural strength
- 68 MPa
- Elongation at break (XY)
- 6.3 %
Thermal properties
- Glass transition (Tg)
- 10 °C
- Melt temperature
- 202 °C
- Melt flow index
- 7.56 g/10min
Composition & special properties
- Glass fiber content
- 15 %
- Abrasive (needs hardened nozzle)
- Yes
HueForge & optics
- TD (transmission distance)
- 3
- TD confidence
- high
- TD source
- tds_pdf
- Colour (hex)
- #00BC43
- Colour (CIELAB)
- L 67 · a −65 · b 49
Storage & care
- Drying temperature
- 80 °C
- Drying time
- 8 h
Scores & identifiers
- FilaScore
- 85
- SKU
- 45758386667760
- MPN
- 41500