Yousu
petg
MaterialPETG
TD2.5
OpaqueLight-pipe
Compare with 3 similar PETG filaments →
Set your printer to see if this filament works with it.
Live prices
Where to buy
Each storefront is shown with its region and currency.
No direct store link tracked for this product yet.
Technical data
Manufacturer specs, normalized
Key engineering values normalized into FilaScope's standard units.
- Density
- 1.27 g/cm³
Note: the linked document is a general manufacturer document, not a per-product technical data sheet.
Values normalized into standard units — see our methodology.
Specifications
Full specifications
Printing settings
- Nozzle temperature
- 230–250 °C
- Nozzle sweet spot
- 235 °C
- Bed temperature
- 70–85 °C
- Part cooling fan
- 20–50 %
- Max print speed
- 150 mm/s
- High-speed capable
- No
- Retraction length
- 1 mm
- Retraction speed
- 30 mm/s
Physical properties
- Diameter
- 1.75 mm
- Density
- 1.27 g/cm³
- Net weight
- 1000 g
- Pack quantity
- 1
- Finish
- Standard
Thermal properties
- Melt temperature
- 220 °C
Composition & special properties
- Abrasive (needs hardened nozzle)
- No
HueForge & optics
- TD (transmission distance)
- 2.5
- TD confidence
- low
- TD source
- filament-pass
Storage & care
- Moisture sensitivity
- high
- Drying temperature
- 65 °C
- Drying time
- 6 h
- Moisture care
- Hygroscopic. Dry at 65°C for 6h before use.
Scores & identifiers
- SKU
- N/A
