Yousu
YOUSU PET filament Transparent Material 3D Printer Filament 1.75mm 1kg High Toughness and High Transparent Printing Material
Compare with 3 similar PET filaments →
Set your printer to see if this filament works with it.
Live prices
Where to buy
Each storefront is shown with its region and currency.
Price history (USD, 37 days tracked)
- Today
- $31.99
- Lowest ever
- $31.992026-02-27
- Typical
- $31.99
Today's price matches the lowest we've tracked — a good time to buy.
Track it
Price-drop alert
Contribute
Know this filament's TD?
Technical data
Manufacturer specs, normalized
Key engineering values normalized into FilaScope's standard units.
- Tensile strength
- 60 MPa
- Tensile modulus
- 3000 MPa
- Elongation at break
- 6 %
- Impact strength
- 4 kJ/m²
- Flexural strength
- 90 MPa
- Density
- 1.23 g/cm³
Note: the linked document is a general manufacturer document, not a per-product technical data sheet.
Values normalized into standard units — see our methodology.
Specifications
Full specifications
Printing settings
- High-speed capable
- No
Physical properties
- Diameter
- 1.75 mm
- Density
- 1.23 g/cm³
- Pack quantity
- 1
- Finish
- Translucent
Mechanical properties
- Tensile strength (XY)
- 60 MPa
- Tensile modulus (XY)
- 3000 MPa
- Flexural strength
- 90 MPa
- Impact strength
- 4 kJ/m²
- Elongation at break (XY)
- 6 %
Composition & special properties
- Abrasive (needs hardened nozzle)
- No
HueForge & optics
- Colour (hex)
- #FFFFFF
- Colour (CIELAB)
- L 100 · a 0 · b 0
Scores & identifiers
- FilaScore
- 3.5
- Strength index
- 4
