Bambu Lab
Support for PLA/PETG
Compare with 3 similar PETG filaments →
Set your printer to see if this filament works with it.
Live prices
Where to buy
Each storefront is shown with its region and currency.
Price history (USD, 35 days tracked)
- Today
- $34.99
- Lowest ever
- $34.992026-04-23
- Typical
- $34.99
Today's price matches the lowest we've tracked — a good time to buy.
Track it
Price-drop alert
Contribute
Know this filament's TD?
Technical data
Manufacturer specs, normalized
Key engineering values normalized into FilaScope's standard units.
- Glass transition
- 10 °C
- Tensile strength
- 3 MPa
- Elongation at break
- 3 %
- Flexural strength
- 3 MPa
- Density
- 1.28 g/cm³
- Melt flow index
- 14.3 g/10min
Note: the linked document is a general manufacturer document, not a per-product technical data sheet.
Values normalized into standard units — see our methodology.
Specifications
Full specifications
Printing settings
- Nozzle temperature
- 190–240 °C
- Bed temperature
- 35–60 °C
- Max print speed
- 100 mm/s
- High-speed capable
- No
Physical properties
- Diameter
- 1.75 mm
- Density
- 1.28 g/cm³
- Net weight
- 500 g
- Pack quantity
- 1
- Finish
- Standard
Mechanical properties
- Tensile strength (XY)
- 3 MPa
- Bending modulus
- 3 MPa
- Flexural strength
- 3 MPa
- Elongation at break (XY)
- 3 %
Thermal properties
- Glass transition (Tg)
- 10 °C
- Melt temperature
- 185 °C
- Melt flow index
- 14.3 g/10min
Composition & special properties
- Abrasive (needs hardened nozzle)
- No
HueForge & optics
- TD confidence
- high
- TD source
- tds_pdf
- Colour (hex)
- #2B2423
- Colour (CIELAB)
- L 15 · a 3 · b 2
Storage & care
- Moisture sensitivity
- moderate
- Drying temperature
- 75 °C
- Drying time
- 8 h
Scores & identifiers
- FilaScore
- 95