Polymaker
Polymaker PETG Galaxy
Compare with 3 similar PETG filaments →
Set your printer to see if this filament works with it.
Live prices
Where to buy
Each storefront is shown with its region and currency.
Price history (USD, 35 days tracked)
- Today
- $33.99
- Lowest ever
- $20.992026-05-07
- Typical
- $33.99
Today's price is in the normal range.
Track it
Price-drop alert
Contribute
Know this filament's TD?
Technical data
Manufacturer specs, normalized
Key engineering values normalized into FilaScope's standard units.
- Glass transition
- 71.24 °C
- HDT @0.45 MPa
- 69 °C
- HDT @1.8 MPa
- 65 °C
- Tensile strength
- 47.96 MPa
- Elongation at break
- 9.33 %
- Flexural strength
- 80.08 MPa
- Density
- 1.3 g/cm³
- Melt flow index
- 16.3 g/10min
Values normalized into standard units — see our methodology.
Specifications
Full specifications
Printing settings
- Nozzle sweet spot
- 235 °C
- High-speed capable
- No
- Retraction length
- 1 mm
- Retraction speed
- 30 mm/s
Physical properties
- Diameter
- 1.75 mm
- Density
- 1.3 g/cm³
- Net weight
- 1000 g
- Pack quantity
- 1
- Finish
- Galaxy
Mechanical properties
- Tensile strength (XY)
- 47.96 MPa
- Bending modulus
- 2277.34 MPa
- Flexural strength
- 80.08 MPa
- Elongation at break (XY)
- 9.33 %
Thermal properties
- Glass transition (Tg)
- 71.24 °C
- HDT @ 0.45 MPa
- 69 °C
- HDT @ 1.8 MPa
- 65 °C
- Vicat softening
- 75 °C
- Melt temperature
- 220 °C
- Melt flow index
- 16.3 g/10min
Composition & special properties
- Abrasive (needs hardened nozzle)
- No
- Water absorption
- 0.51 %
HueForge & optics
- TD confidence
- low
- TD source
- filament-pass
- Colour (hex)
- #FF0000
- Colour (CIELAB)
- L 53 · a 80 · b 67
Storage & care
- Moisture sensitivity
- moderate
- Drying temperature
- 65 °C
- Drying time
- 6 h
- Moisture care
- Hygroscopic. Dry at 65°C for 6h before use.
Scores & identifiers
- SKU
- PB05024
