Kingroon
Kingroon Transparent PLA Filament 1KG — Transparent (2kg)
OpaqueLight-pipe
Compare with 3 similar PLA filaments →
Set your printer to see if this filament works with it.
Palette
26 colours
Pick a shade to preview it — open its page for full prices.
Live prices
Where to buy
Each storefront is shown with its region and currency.
Technical data
Manufacturer specs, normalized
Key engineering values normalized into FilaScope's standard units.
- Density
- 1.24 g/cm³
Note: the linked document is a general manufacturer document, not a per-product technical data sheet.
Values normalized into standard units — see our methodology.
Specifications
Full specifications
Printing settings
- Nozzle temperature
- 190–220 °C
- Nozzle sweet spot
- 210 °C
- Bed temperature
- 25–60 °C
- Part cooling fan
- 50–100 %
- Max print speed
- 200 mm/s
- High-speed capable
- No
- Retraction length
- 0.8 mm
- Retraction speed
- 30 mm/s
Physical properties
- Diameter
- 1.75 mm
- Density
- 1.24 g/cm³
- Net weight
- 2000 g
- Pack quantity
- 2
- Finish
- Translucent
Thermal properties
- Melt temperature
- 190 °C
Composition & special properties
- Abrasive (needs hardened nozzle)
- No
HueForge & optics
- TD (transmission distance)
- 1.8
- TD confidence
- low
- TD source
- filament-pass
- Colour (hex)
- #EBB335
- Colour (CIELAB)
- L 76 · a 9 · b 68
Storage & care
- Moisture sensitivity
- medium
- Drying temperature
- 40 °C
- Drying time
- 4 h
- Moisture care
- Store in dry box. Dry at 40°C for 4h if brittle.
