FlashForge
FlashForge PC Ash
OpaqueLight-pipe
Compare with 3 similar PC filaments →
Set your printer to see if this filament works with it.
Live prices
Where to buy
Each storefront is shown with its region and currency.
Price history (USD, 36 days tracked)
- Today
- $22.93
- Lowest ever
- $22.932026-04-21
- Typical
- $22.93
Today's price matches the lowest we've tracked — a good time to buy.
Technical data
Manufacturer specs, normalized
Key engineering values normalized into FilaScope's standard units.
- Density
- 1.2 g/cm³
Note: the linked document is a general manufacturer document, not a per-product technical data sheet.
Values normalized into standard units — see our methodology.
Specifications
Full specifications
Printing settings
- Nozzle temperature
- 260–310 °C
- Nozzle sweet spot
- 285 °C
- Bed temperature
- 90–120 °C
- Part cooling fan
- 0–20 %
- Max print speed
- 60 mm/s
- Retraction length
- 1 mm
- Retraction speed
- 30 mm/s
Physical properties
- Diameter
- 1.75 mm
- Density
- 1.2 g/cm³
- Net weight
- 1000 g
- Pack quantity
- 1
Thermal properties
- Melt temperature
- 260 °C
Composition & special properties
- Abrasive (needs hardened nozzle)
- No
HueForge & optics
- TD (transmission distance)
- 0.5
- TD confidence
- low
- TD source
- filament-pass
- Colour (hex)
- #B2BEB5
- Colour (CIELAB)
- L 76 · a −6 · b 3
Storage & care
- Moisture sensitivity
- very_high
- Drying temperature
- 80 °C
- Drying time
- 8 h
- Moisture care
- Very hygroscopic. Dry at 80°C for 8h. Print from dry box.
Scores & identifiers
- FilaScore
- 95
- Ease of printing
- 65
- Value score
- 95
- MPN
- DLZ-AD4S-Air Filter-A-B-5
