Elegoo
Elegoo ASA Black
OpaqueLight-pipe
Compare with 3 similar ASA filaments →
Set your printer to see if this filament works with it.
Palette
8 colours
Pick a shade to preview it — open its page for full prices.
Live prices
Where to buy
Each storefront is shown with its region and currency.
Technical data
Manufacturer specs, normalized
Key engineering values normalized into FilaScope's standard units.
- Density
- 1.05 g/cm³
Values normalized into standard units — see our methodology.
Specifications
Full specifications
Printing settings
- Nozzle temperature
- 240–260 °C
- Part cooling fan
- 0–20 %
- Max print speed
- 150 mm/s
- Retraction length
- 0.8 mm
- Retraction speed
- 30 mm/s
Physical properties
- Diameter
- 1.75 mm
- Density
- 1.05 g/cm³
- Net weight
- 5000 g
- Pack quantity
- 1
Thermal properties
- Melt temperature
- 240 °C
Composition & special properties
- Abrasive (needs hardened nozzle)
- No
HueForge & optics
- TD (transmission distance)
- 1.5
- TD confidence
- low
- TD source
- filament-pass
- Colour (hex)
- #E5B37C
- Colour (CIELAB)
- L 76 · a 11 · b 35
Storage & care
- Moisture sensitivity
- medium
- Drying temperature
- 60 °C
- Drying time
- 4 h
- Moisture care
- Store in dry conditions. Dry at 60°C for 4h.
Scores & identifiers
- FilaScore
- 88
- Ease of printing
- 100
