Yousu
YOUSU ABS 3d filament 1.75mm filament 1kg
OpaqueLight-pipe
Compare with 3 similar ABS filaments →
Set your printer to see if this filament works with it.
Live prices
Where to buy
Each storefront is shown with its region and currency.
Price history (USD, 37 days tracked)
- Today
- $31.99
- Lowest ever
- $31.992026-02-27
- Typical
- $31.99
Today's price matches the lowest we've tracked — a good time to buy.
Track it
Price-drop alert
Technical data
Manufacturer specs, normalized
Key engineering values normalized into FilaScope's standard units.
- Tensile strength
- 60 MPa
- Tensile modulus
- 3000 MPa
- Elongation at break
- 6 %
- Impact strength
- 4 kJ/m²
- Flexural strength
- 90 MPa
- Density
- 1.04 g/cm³
Note: the linked document is a general manufacturer document, not a per-product technical data sheet.
Values normalized into standard units — see our methodology.
Specifications
Full specifications
Printing settings
- Nozzle temperature
- 230–260 °C
- Bed temperature
- 90–110 °C
- Part cooling fan
- 0–20 %
- Max print speed
- 150 mm/s
- High-speed capable
- No
- Retraction length
- 0.8 mm
- Retraction speed
- 30 mm/s
Physical properties
- Diameter
- 1.75 mm
- Density
- 1.04 g/cm³
- Pack quantity
- 1
- Finish
- Standard
Mechanical properties
- Tensile strength (XY)
- 60 MPa
- Tensile modulus (XY)
- 3000 MPa
- Flexural strength
- 90 MPa
- Impact strength
- 4 kJ/m²
- Elongation at break (XY)
- 6 %
Thermal properties
- Melt temperature
- 230 °C
Composition & special properties
- Abrasive (needs hardened nozzle)
- No
HueForge & optics
- TD (transmission distance)
- 1.5
- TD confidence
- low
- TD source
- filament-pass
Storage & care
- Moisture sensitivity
- medium
- Drying temperature
- 60 °C
- Drying time
- 4 h
- Moisture care
- Store in dry conditions. Dry at 60°C for 4h.
Scores & identifiers
- FilaScore
- 3.5
- Strength index
- 4
