Kingroon
Kingroon ABS
MaterialABS
TD1.5
OpaqueLight-pipe
Compare with 3 similar ABS filaments →
Set your printer to see if this filament works with it.
Live prices
Where to buy
Each storefront is shown with its region and currency.
Price history (USD, 36 days tracked)
- Today
- $31.99
- Lowest ever
- $31.992026-04-21
- Typical
- $31.99
Today's price matches the lowest we've tracked — a good time to buy.
Track it
Price-drop alert
Technical data
Manufacturer specs, normalized
Key engineering values normalized into FilaScope's standard units.
- Density
- 1.04 g/cm³
Note: the linked document is a general manufacturer document, not a per-product technical data sheet.
Values normalized into standard units — see our methodology.
Specifications
Full specifications
Printing settings
- Nozzle temperature
- 240–270 °C
- Bed temperature
- 80–120 °C
- Part cooling fan
- 0–20 %
- Max print speed
- 150 mm/s
- High-speed capable
- No
- Retraction length
- 0.8 mm
- Retraction speed
- 30 mm/s
Physical properties
- Density
- 1.04 g/cm³
- Pack quantity
- 1
Thermal properties
- Melt temperature
- 240 °C
Composition & special properties
- Abrasive (needs hardened nozzle)
- No
HueForge & optics
- TD (transmission distance)
- 1.5
- TD confidence
- low
- TD source
- filament-pass
- Colour (hex)
- #2B2D33
- Colour (CIELAB)
- L 18 · a 1 · b −4
Storage & care
- Moisture sensitivity
- medium
- Drying temperature
- 60 °C
- Drying time
- 4 h
- Moisture care
- Store in dry conditions. Dry at 60°C for 4h.
Scores & identifiers
- MPN
- B0978*2
