Compare Filaments
Rows where the filaments differ are marked and bolded.
| Spec | Amolen TPU Basic — Yellow (TPU, 1kg)Amolen$22.99 → | Amolen TPU Flexible Variety Pack — Black/White/Gray/Clear (TPU, 800g)Amolen$29.99 → | Amolen TPU Flexible Transparent Multicolor Rainbow Variety Pack — Rainbow TPU Variety pack 200g*4 Spools (TPU, 800g)Amolen$29.99 → | 3DXFLEX TPU (95A) - Black3DXTech$48.00 → |
|---|---|---|---|---|
| Printing settings | ||||
| Nozzle temperature | 200–230 °C | 200–230 °C | 200–230 °C | 220–250 °C |
| Nozzle sweet spot | — | — | — | 225 °C |
| Bed temperature | 30–60 °C | 30–60 °C | 30–60 °C | 40–60 °C |
| Part cooling fan | — | — | — | 0–30 % |
| Max print speed | — | — | — | 30 mm/s |
| High-speed capable | No | No | No | No |
| Retraction length | — | — | — | 2 mm |
| Retraction speed | — | — | — | 25 mm/s |
| Physical properties | ||||
| Diameter | 1.75 mm | 1.75 mm | 1.75 mm | 1.75 mm |
| Density | — | — | — | 1.2 g/cm³ |
| Net weight | 1000 g | 800 g | 800 g | 500 g |
| Pack quantity | 1 | 1 | 1 | 1 |
| Finish | Standard | Standard | Standard | Standard |
| Thermal properties | ||||
| Melt temperature | — | — | — | 210 °C |
| Composition & special properties | ||||
| Abrasive (needs hardened nozzle) | No | No | No | No |
| HueForge & optics | ||||
| TD (transmission distance) | — | — | — | 2 |
| TD confidence | — | — | — | low |
| TD source | — | — | — | filament-pass |
| Colour (hex) | FFD700 | 1A1A1A | FF69B4 | #1A1A1A |
| Colour (CIELAB) | L 87 · a −2 · b 87 | L 9 · a 0 · b 0 | L 65 · a 64 · b −11 | L 9 · a 0 · b 0 |
| Storage & care | ||||
| Moisture sensitivity | — | — | — | very_high |
| Drying temperature | — | — | — | 50 °C |
| Drying time | — | — | — | 4 h |
| Moisture care | — | — | — | Very hygroscopic. Dry at 50°C for 4h. Store sealed. |
| Scores & identifiers | ||||
| FilaScore | — | — | — | 3.9 |
| SKU | 3DTPUYEW | 3DTPUSETA | 3DTPUSET | TPU06UN100500BK01 |
| MPN | — | 3DTPUSETA | — | — |