Compare Filaments
Rows where the filaments differ are marked and bolded.
| Spec | 3DXTech ThermaX PSU — Black (1.75mm, 500g)3DXTech$75.00 → | Printed Solid PSU NaturalPrinted Solid$125.00 → |
|---|---|---|
| Printing settings | ||
| Nozzle temperature | — | 190–220 °C |
| Bed temperature | — | 40–60 °C |
| Part cooling fan | — | 80–100 % |
| Max print speed | — | 60 mm/s |
| High-speed capable | No | No |
| Physical properties | ||
| Diameter | 1.75 mm | 1.75 mm |
| Density | — | 1.24 g/cm³ |
| Net weight | 500 g | 500 g |
| Pack quantity | 1 | — |
| Finish | Standard | — |
| Mechanical properties | ||
| Tensile strength (XY) | — | 50 MPa |
| Tensile modulus (XY) | — | 3500 MPa |
| Elongation at break (XY) | — | 6 % |
| Composition & special properties | ||
| Abrasive (needs hardened nozzle) | No | No |
| HueForge & optics | ||
| Colour (hex) | #F4D4A3 | #ECCC9B |
| Colour (CIELAB) | L 86 · a 4 · b 28 | L 84 · a 4 · b 29 |
| Storage & care | ||
| Moisture sensitivity | — | 2 |
| Drying temperature | — | 45 °C |
| Drying time | — | 4 h |
| Scores & identifiers | ||
| FilaScore | — | 57 |
| SKU | PSU01UN200500BK01 | PSU01UN200500NAT0 |
| MPN | — | PSU01UN200500NAT0 |