Compare Filaments
Rows where the filaments differ are marked and bolded.
| Spec | Bambu Lab PLA Tough+ — Yellow (1kg)Bambu Lab | Bambu Lab PLA Tough+ — Black (Refill, 1kg)Bambu Lab |
|---|---|---|
| Printing settings | ||
| Nozzle temperature | 220–250 °C | 220–250 °C |
| Bed temperature | 35–65 °C | 35–65 °C |
| Max print speed | 300 mm/s | 300 mm/s |
| High-speed capable | No | No |
| Physical properties | ||
| Diameter | 1.75 mm | 1.75 mm |
| Density | 1.21 g/cm³ | 1.21 g/cm³ |
| Net weight | 1000 g | 1000 g |
| Pack quantity | 1 | 1 |
| Finish | Standard | Standard |
| Spool material | plastic | — |
| Mechanical properties | ||
| Tensile strength (XY) | 34.9 MPa | 34.9 MPa |
| Tensile modulus (XY) | 1860 MPa | 1860 MPa |
| Bending modulus | 2140 MPa | 2140 MPa |
| Flexural strength | 65 MPa | 65 MPa |
| Elongation at break (XY) | 9.4 % | 9.4 % |
| Thermal properties | ||
| Glass transition (Tg) | 61 °C | 61 °C |
| Vicat softening | 62 °C | 62 °C |
| Melt temperature | 151 °C | 151 °C |
| Melt flow index | 18 g/10min | 18 g/10min |
| Composition & special properties | ||
| Abrasive (needs hardened nozzle) | No | No |
| HueForge & optics | ||
| TD confidence | high | high |
| TD source | tds_pdf | tds_pdf |
| Colour (hex) | #FED443 | #1A1A1A |
| Colour (CIELAB) | L 86 · a 1 · b 73 | L 9 · a 0 · b 0 |
| Storage & care | ||
| Moisture sensitivity | low | low |
| Drying temperature | 55 °C | 55 °C |
| Drying time | 8 h | 8 h |
| Scores & identifiers | ||
| FilaScore | 95 | 95 |
| SKU | 624467991622688774 | 659539854447239168 |
| MPN | 12401 | 12104 |