Compare Filaments
Rows where the filaments differ are marked and bolded.
| Spec | Amolen PLA Glow-in-the-Dark — Red (PLA, 1kg)Amolen$29.99 → | PLA Silk Dual Color - Peach OrangeAmolen$23.99 → | Amolen PLA Silk Shiny Gradient Variety Pack — Silk Shiny C- Red Gold/Blue Red Purple/Black Fuchsia/Blue Green Purple (PLA, 800g)Amolen$32.99 → | Amolen PLA Basic Dual Color-High Speed — Black & Gold (PLA, 1kg)Amolen$26.99 → |
|---|---|---|---|---|
| Printing settings | ||||
| Nozzle temperature | 190–220 °C | 190–230 °C | 190–220 °C | 190–220 °C |
| Nozzle sweet spot | — | 210 °C | — | — |
| Bed temperature | 25–60 °C | 45–60 °C | 25–60 °C | 25–60 °C |
| Part cooling fan | — | 50–100 % | — | — |
| Max print speed | — | 200 mm/s | — | — |
| High-speed capable | No | No | No | Yes |
| Retraction length | — | 0.8 mm | — | — |
| Retraction speed | — | 30 mm/s | — | — |
| Physical properties | ||||
| Diameter | 1.75 mm | 1.75 mm | 1.75 mm | 1.75 mm |
| Density | — | 1.24 g/cm³ | — | — |
| Net weight | 1000 g | 1000 g | 800 g | 1000 g |
| Pack quantity | 1 | 1 | 1 | 1 |
| Finish | Glow | Silk | Silk | Standard |
| Thermal properties | ||||
| Melt temperature | — | 190 °C | — | — |
| Composition & special properties | ||||
| Abrasive (needs hardened nozzle) | No | No | No | No |
| HueForge & optics | ||||
| TD (transmission distance) | — | 1.8 | — | — |
| TD confidence | — | low | — | — |
| TD source | — | filament-pass | — | — |
| Colour (hex) | CC0000 | #F97316 | FF00FF | 1A1A1A |
| Colour (CIELAB) | L 43 · a 68 · b 57 | L 64 · a 47 · b 68 | L 60 · a 98 · b −61 | L 9 · a 0 · b 0 |
| Storage & care | ||||
| Moisture sensitivity | — | medium | — | — |
| Drying temperature | — | 40 °C | — | — |
| Drying time | — | 4 h | — | — |
| Moisture care | — | Store in dry box. Dry at 40°C for 4h if brittle. | — | — |
| Scores & identifiers | ||||
| FilaScore | — | 5.7 | — | — |
| SKU | 3DGLOWRED | #1-3DSDCOP | 3DN2BLGRPU | 3DBLKGOD |
| MPN | — | AMOLEN-018775-9607 | 3DN2BLGRPU | 3DBLKGOD |