Compare Filaments
Rows where the filaments differ are marked and bolded.
| Spec | Prusament PLA Galaxy SilverPrusament | Prusament PLA Galaxy GalaxyPrusament | Prusament PLA Galaxy GalaxyPrusament | Prusament PLA Galaxy GalaxyPrusament |
|---|---|---|---|---|
| Printing settings | ||||
| Nozzle temperature | 215–215 °C | 215–215 °C | 215–215 °C | 215–215 °C |
| Bed temperature | 60–60 °C | 60–60 °C | 60–60 °C | 60–60 °C |
| Max print speed | 200 mm/s | 200 mm/s | 200 mm/s | 200 mm/s |
| High-speed capable | No | No | No | No |
| Physical properties | ||||
| Diameter | 1.75 mm | 1.75 mm | 1.75 mm | 1.75 mm |
| Density | 1.24 g/cm³ | 1.24 g/cm³ | 1.24 g/cm³ | 1.24 g/cm³ |
| Net weight | 1000 g | 1000 g | 1000 g | 1000 g |
| Pack quantity | 1 | 1 | 1 | 1 |
| Finish | Galaxy | Galaxy | Galaxy | Galaxy |
| Mechanical properties | ||||
| Tensile strength (XY) | 51 MPa | 51 MPa | 51 MPa | 51 MPa |
| Tensile modulus (XY) | 2300 MPa | 2300 MPa | 2300 MPa | 2300 MPa |
| Bending modulus | 3100 MPa | 3100 MPa | 3100 MPa | 3100 MPa |
| Flexural strength | 83 MPa | 83 MPa | 83 MPa | 83 MPa |
| Impact strength | 13 kJ/m² | 13 kJ/m² | 13 kJ/m² | 13 kJ/m² |
| Elongation at break (XY) | 2.9 % | 2.9 % | 2.9 % | 2.9 % |
| Shore hardness (D) | 81 | 81 | 81 | 81 |
| Thermal properties | ||||
| HDT @ 0.45 MPa | 55 °C | 55 °C | 55 °C | 55 °C |
| HDT @ 1.8 MPa | 55 °C | 55 °C | 55 °C | 55 °C |
| Composition & special properties | ||||
| Abrasive (needs hardened nozzle) | No | No | No | No |
| HueForge & optics | ||||
| Colour (hex) | #C0C0C0 | #E53E3E | #8B5CF6 | #22C55E |
| Colour (CIELAB) | L 78 · a 0 · b 0 | L 52 · a 63 · b 39 | L 52 · a 53 · b −71 | L 70 · a −62 · b 40 |
| Storage & care | ||||
| Moisture sensitivity | low | low | low | low |
| Scores & identifiers | ||||
| FilaScore | 5.3 | 5.3 | 5.3 | 5.3 |
| SKU | PRUSAMENT-pla-galaxy-silver | PRUSAMENT-pla-galaxy-red | PRUSAMENT-pla-galaxy-purple | PRUSAMENT-pla-galaxy-green |