Compare Filaments
Rows where the filaments differ are marked and bolded.
| Spec | Polymaker PLAPolymaker$20.99 → | PLA Silk Dual Color - Peach OrangeAmolen$23.99 → | Amolen PLA Basic Variety Pack — Black/White/Red/Green (PLA, 1kg)Amolen$29.99 → | Amolen PLA Basic Dual Color-High Speed — Black & Gold (PLA, 1kg)Amolen$26.99 → |
|---|---|---|---|---|
| Printing settings | ||||
| Nozzle temperature | 190–220 °C | 190–230 °C | 190–220 °C | 190–220 °C |
| Nozzle sweet spot | 210 °C | 210 °C | — | — |
| Bed temperature | 25–60 °C | 45–60 °C | 25–60 °C | 25–60 °C |
| Part cooling fan | 50–100 % | 50–100 % | — | — |
| Max print speed | — | 200 mm/s | — | — |
| High-speed capable | No | No | No | Yes |
| Retraction length | 0.8 mm | 0.8 mm | — | — |
| Retraction speed | 30 mm/s | 30 mm/s | — | — |
| Physical properties | ||||
| Diameter | 1.75 mm | 1.75 mm | 1.75 mm | 1.75 mm |
| Density | 1.17 g/cm³ | 1.24 g/cm³ | — | — |
| Net weight | 1000 g | 1000 g | 1000 g | 1000 g |
| Pack quantity | 1 | 1 | 1 | 1 |
| Finish | Marble | Silk | Standard | Standard |
| Mechanical properties | ||||
| Tensile strength (XY) | 52.3 MPa | — | — | — |
| Bending modulus | 3230.9 MPa | — | — | — |
| Flexural strength | 86.9 MPa | — | — | — |
| Elongation at break (XY) | 6.3 % | — | — | — |
| Thermal properties | ||||
| Glass transition (Tg) | 61 °C | — | — | — |
| HDT @ 0.45 MPa | 59 °C | — | — | — |
| HDT @ 1.8 MPa | 58 °C | — | — | — |
| Vicat softening | 62 °C | — | — | — |
| Melt temperature | 150 °C | 190 °C | — | — |
| Melt flow index | 7 g/10min | — | — | — |
| Composition & special properties | ||||
| Abrasive (needs hardened nozzle) | No | No | No | No |
| Water absorption | 0.51 % | — | — | — |
| HueForge & optics | ||||
| TD (transmission distance) | — | 1.8 | — | — |
| TD confidence | low | low | — | — |
| TD source | filament-pass | filament-pass | — | — |
| Colour (hex) | #786D5F | #F97316 | 1A1A1A | 1A1A1A |
| Colour (CIELAB) | L 47 · a 2 · b 9 | L 64 · a 47 · b 68 | L 9 · a 0 · b 0 | L 9 · a 0 · b 0 |
| Storage & care | ||||
| Moisture sensitivity | low | medium | — | — |
| Drying temperature | 40 °C | 40 °C | — | — |
| Drying time | 4 h | 4 h | — | — |
| Moisture care | Store in dry box. Dry at 40°C for 4h if brittle. | Store in dry box. Dry at 40°C for 4h if brittle. | — | — |
| Scores & identifiers | ||||
| FilaScore | 7.8 | 5.7 | — | — |
| SKU | CA04003 | #1-3DSDCOP | 3DPLASET A | 3DBLKGOD |
| MPN | — | AMOLEN-018775-9607 | — | 3DBLKGOD |