Compare Filaments
Rows where the filaments differ are marked and bolded.
| Spec | colorFabb LW-PLA — YELLOW (1.75mm, 750g)ColorFabb | colorFabb LW-PLA — GREEN (1.75mm, 750g)colorFabb | colorFabb LW-PLA — RED (1.75mm, 750g)colorFabb | colorFabb LW-PLA — BLACK (1.75mm, 750g)colorFabb |
|---|---|---|---|---|
| Printing settings | ||||
| Nozzle temperature | 200–230 °C | — | 190–220 °C | 190–220 °C |
| Nozzle sweet spot | — | — | 210 °C | 210 °C |
| Bed temperature | 50–60 °C | — | 25–60 °C | 25–60 °C |
| Part cooling fan | — | — | 50–100 % | 50–100 % |
| Max print speed | — | — | 200 mm/s | 200 mm/s |
| High-speed capable | No | No | No | No |
| Retraction length | — | — | 0.8 mm | 0.8 mm |
| Retraction speed | — | — | 30 mm/s | 30 mm/s |
| Physical properties | ||||
| Diameter | 1.75 mm | 1.75 mm | 1.75 mm | 1.75 mm |
| Density | — | — | 1.24 g/cm³ | 1.24 g/cm³ |
| Net weight | 750 g | 750 g | 750 g | 750 g |
| Pack quantity | 1 | 1 | 1 | 1 |
| Finish | Standard | Standard | Standard | Standard |
| Thermal properties | ||||
| Melt temperature | — | — | 190 °C | 190 °C |
| Composition & special properties | ||||
| Abrasive (needs hardened nozzle) | No | No | No | No |
| HueForge & optics | ||||
| TD (transmission distance) | — | — | 1.8 | 1.8 |
| TD confidence | — | — | low | low |
| TD source | — | — | filament-pass | filament-pass |
| Colour (hex) | #B49272 | #B49272 | #B49273 | #B49272 |
| Colour (CIELAB) | L 63 · a 8 · b 22 | L 63 · a 8 · b 22 | L 63 · a 8 · b 21 | L 63 · a 8 · b 22 |
| Storage & care | ||||
| Moisture sensitivity | — | — | medium | medium |
| Drying temperature | — | — | 40 °C | 40 °C |
| Drying time | — | — | 4 h | 4 h |
| Moisture care | — | — | Store in dry box. Dry at 40°C for 4h if brittle. | Store in dry box. Dry at 40°C for 4h if brittle. |
| Scores & identifiers | ||||
| FilaScore | — | — | 6.2 | 6.2 |
| SKU | 030021 | 030022 | 030020 | 030010 |