Compare Filaments
Rows where the filaments differ are marked and bolded.
| Spec | TreeD Filaments Fast Forward 3-Pack: PLA, ABS, PETG — Default (800g, 2.85mm)TreeD Filaments$40.50 → | Amolen PETG Transparent Variety Pack — PETG-Black/Orange/Purple/Red (PETG, 1kg)Amolen$29.99 → | Amolen PETG Basic Variety Pack,4KG — Black/White/Grey/Red (PETG, 4kg)Amolen$72.99 → | PETG Transparent - TransparentAmolen$19.99 → |
|---|---|---|---|---|
| Printing settings | ||||
| Nozzle temperature | — | 220–250 °C | 220–250 °C | 230–250 °C |
| Nozzle sweet spot | — | — | — | 235 °C |
| Bed temperature | — | 70–85 °C | 70–85 °C | 70–85 °C |
| Part cooling fan | — | — | — | 20–50 % |
| Max print speed | — | — | — | 150 mm/s |
| High-speed capable | — | No | No | No |
| Retraction length | — | — | — | 1 mm |
| Retraction speed | — | — | — | 30 mm/s |
| Physical properties | ||||
| Diameter | 2.85 mm | 1.75 mm | 1.75 mm | 1.75 mm |
| Density | — | — | — | 1.27 g/cm³ |
| Net weight | 800 g | 1000 g | 4000 g | 1000 g |
| Pack quantity | 1 | 1 | 1 | 1 |
| Finish | Standard | Transparent | Standard | Translucent |
| Thermal properties | ||||
| Melt temperature | — | — | — | 220 °C |
| Composition & special properties | ||||
| Abrasive (needs hardened nozzle) | No | No | No | No |
| HueForge & optics | ||||
| TD (transmission distance) | — | — | — | 2.5 |
| TD confidence | — | — | — | low |
| TD source | — | — | — | filament-pass |
| Colour (hex) | #808080 | #BC343B | #C3343C | #E8E8E8 |
| Colour (CIELAB) | L 54 · a 0 · b 0 | L 43 · a 54 · b 28 | L 45 · a 56 · b 30 | L 92 · a 0 · b 0 |
| Storage & care | ||||
| Moisture sensitivity | — | — | — | high |
| Drying temperature | — | — | — | 65 °C |
| Drying time | — | — | — | 6 h |
| Moisture care | — | — | — | Hygroscopic. Dry at 65°C for 6h before use. |
| Scores & identifiers | ||||
| FilaScore | — | — | — | 5.3 |
| SKU | FF3PACK-Default-800g-2.85mm | 3DPETGBLKORPURE | 3DPETGBLK+3DPETGPWH+3DPETGGRA+3DPETGBL | 3DPETGTRTM |
| MPN | — | — | AMOLEN-339607-0407 | — |