Compare Filaments
Rows where the filaments differ are marked and bolded.
| Spec | PETG - Sulfur Yellow3DXTech$13.49 → | Amolen PETG Transparent Variety Pack — PETG-Black/Orange/Purple/Red (PETG, 1kg)Amolen$29.99 → | Amolen PETG Transparent Rainbow (PETG, 1kg)Amolen$19.99 → | PETG Transparent - TransparentAmolen$17.99 → |
|---|---|---|---|---|
| Printing settings | ||||
| Nozzle temperature | 220–250 °C | 220–250 °C | 220–250 °C | 230–250 °C |
| Nozzle sweet spot | 235 °C | — | — | 235 °C |
| Bed temperature | 60–85 °C | 70–85 °C | 70–85 °C | 70–85 °C |
| Part cooling fan | 20–50 % | — | — | 20–50 % |
| Max print speed | 150 mm/s | — | — | 150 mm/s |
| High-speed capable | No | No | No | No |
| Retraction length | 1 mm | — | — | 1 mm |
| Retraction speed | 30 mm/s | — | — | 30 mm/s |
| Physical properties | ||||
| Diameter | 1.75 mm | 1.75 mm | 1.75 mm | 1.75 mm |
| Density | 1.27 g/cm³ | — | — | 1.27 g/cm³ |
| Net weight | 750 g | 1000 g | 1000 g | 1000 g |
| Pack quantity | 1 | 1 | 1 | 1 |
| Finish | Standard | Transparent | Transparent | Translucent |
| Thermal properties | ||||
| Melt temperature | 220 °C | — | — | 220 °C |
| Composition & special properties | ||||
| Abrasive (needs hardened nozzle) | No | No | No | No |
| HueForge & optics | ||||
| TD (transmission distance) | 2.5 | — | — | 2.5 |
| TD confidence | low | — | — | low |
| TD source | filament-pass | — | — | filament-pass |
| Colour (hex) | #FACC15 | FF6600 | 808080 | #E8E8E8 |
| Colour (CIELAB) | L 84 · a 2 · b 82 | L 62 · a 55 · b 71 | L 54 · a 0 · b 0 | L 92 · a 0 · b 0 |
| Storage & care | ||||
| Moisture sensitivity | high | — | — | high |
| Drying temperature | 65 °C | — | — | 65 °C |
| Drying time | 6 h | — | — | 6 h |
| Moisture care | Hygroscopic. Dry at 65°C for 6h before use. | — | — | Hygroscopic. Dry at 65°C for 6h before use. |
| Scores & identifiers | ||||
| FilaScore | 4.3 | — | — | 5.3 |
| SKU | PETG175YL2M | 3DPETGBLKORPURE | 3DPETGTRRB | 3DPETGTRTM |