Compare Filaments

Rows where the filaments differ are marked and bolded.

Side-by-side specification comparison
Spec	EasyFil ABS (2.85mm, Magenta, 250 gram)FormFutura$24.75 →	Triton ABS - Stratasys Compatible - Mid Blue3DXTech$17.99 →	ABS - Yellow3DXTech$45.00 →	3DXLABS™ EMI-ABS - Black3DXTech$125.00 →
Printing settings
Nozzle temperature	—	230–260 °C	230–260 °C	230–260 °C
Nozzle sweet spot	—	240 °C	240 °C	240 °C
Bed temperature	—	100–110 °C	100–110 °C	100–110 °C
Part cooling fan	—	0–20 %	0–20 %	0–20 %
Max print speed	—	150 mm/s	150 mm/s	150 mm/s
High-speed capable	No	No	No	No
Retraction length	—	0.8 mm	0.8 mm	0.8 mm
Retraction speed	—	30 mm/s	30 mm/s	30 mm/s
Physical properties
Diameter	2.85 mm	1.75 mm	1.75 mm	1.75 mm
Density	—	1.04 g/cm³	1.04 g/cm³	1.04 g/cm³
Net weight	250 g	1000 g	1000 g	750 g
Pack quantity	1	1	1	1
Finish	Standard	Standard	Standard	Standard
Mechanical properties
Flexural strength	—	—	—	76 MPa
Thermal properties
Melt temperature	—	220 °C	220 °C	220 °C
Composition & special properties
Abrasive (needs hardened nozzle)	No	No	No	No
HueForge & optics
TD (transmission distance)	—	1.5	1.5	1.5
TD confidence	—	low	low	high
TD source	—	filament-pass	filament-pass	tds_pdf
Colour (hex)	—	#4682B4	#FFD700	#1A1A1A
Colour (CIELAB)	—	L 52 · a −4 · b −32	L 87 · a −2 · b 87	L 9 · a 0 · b 0
Storage & care
Moisture sensitivity	—	medium	medium	medium
Drying temperature	—	60 °C	60 °C	60 °C
Drying time	—	4 h	4 h	4 h
Moisture care	—	Store in dry conditions. Dry at 60°C for 4h.	Store in dry conditions. Dry at 60°C for 4h.	Store in dry conditions. Dry at 60°C for 4h.
Scores & identifiers
FilaScore	—	6	6	6
SKU	EABS-285MGNT-00250	ABS01UN200923BL05	ABS01UN201000YL01	040BK00A-750G