Compare Filaments
Rows where the filaments differ are marked and bolded.
| Spec | Push Plastic ASA — White (1.75mm, 1kg)Push Plastic$29.99 → | 3DXTech ASA White3DXTech$25.99 → | TRITON™ ASA - Stratasys® Compatible - Natural3DXTech$18.99 → | DuraPro ASA - DuraPro ASA black 1.75 mm 0.75 kgExtrudr |
|---|---|---|---|---|
| Printing settings | ||||
| Nozzle temperature | — | 240–260 °C | 240–260 °C | 230–260 °C |
| Nozzle sweet spot | — | 250 °C | 250 °C | — |
| Bed temperature | — | 90–110 °C | 90–110 °C | 90–110 °C |
| Part cooling fan | — | 0–20 % | 0–20 % | — |
| Max print speed | — | 150 mm/s | 150 mm/s | — |
| High-speed capable | No | No | No | No |
| Retraction length | — | 0.8 mm | 0.8 mm | — |
| Retraction speed | — | 30 mm/s | 30 mm/s | — |
| Physical properties | ||||
| Diameter | 1.75 mm | 1.75 mm | 1.75 mm | 1.75 mm |
| Density | — | 1.05 g/cm³ | 1.05 g/cm³ | — |
| Net weight | 1000 g | 1000 g | 1000 g | 1100 g |
| Pack quantity | 1 | 1 | 1 | 1 |
| Finish | Standard | Standard | Standard | Standard |
| Spool material | — | — | — | Cardboard |
| Thermal properties | ||||
| Melt temperature | — | 235 °C | 235 °C | — |
| Composition & special properties | ||||
| Abrasive (needs hardened nozzle) | No | No | No | No |
| HueForge & optics | ||||
| TD (transmission distance) | — | 1.5 | 1.5 | — |
| TD confidence | — | low | low | — |
| TD source | — | filament-pass | filament-pass | — |
| Colour (hex) | FAFAFA | #FFFFFF | #F5F5DC | #C4C5C6 |
| Colour (CIELAB) | L 98 · a 0 · b 0 | L 100 · a 0 · b 0 | L 96 · a −4 · b 12 | L 79 · a 0 · b −1 |
| Storage & care | ||||
| Moisture sensitivity | — | medium | medium | — |
| Drying temperature | — | 60 °C | 60 °C | — |
| Drying time | — | 4 h | 4 h | — |
| Moisture care | — | Store in dry conditions. Dry at 60°C for 4h. | Store in dry conditions. Dry at 60°C for 4h. | — |
| Scores & identifiers | ||||
| FilaScore | — | 6 | 6 | — |
| SKU | ASA175-1KG-WHT | ASA01UN201000WT01 | ASA02UN200923NAT0 | — |
| MPN | ASA175-1KG-WHT | — | — | — |