Compare Filaments

Rows where the filaments differ are marked and bolded.

Side-by-side specification comparison
Spec	AzureFilm PLA GoldAzureFilm$26.89 →	colorFabb PLA — Vertigo Blueberry Night (1.75mm, 750g)ColorFabb	colorFabb PLA — Chameleon Nebula (1.75mm, 750g)ColorFabb	colorFabb PLA — PASTEL GREEN (1.75mm, 750g)ColorFabb
Printing settings
Nozzle temperature	190–220 °C	200–230 °C	200–230 °C	200–230 °C
Nozzle sweet spot	210 °C	—	—	—
Bed temperature	25–60 °C	50–60 °C	50–60 °C	50–60 °C
Part cooling fan	50–100 %	50–100 %	50–100 %	50–100 %
Max print speed	200 mm/s	200 mm/s	200 mm/s	200 mm/s
High-speed capable	No	No	No	No
Retraction length	0.8 mm	0.8 mm	0.8 mm	0.8 mm
Retraction speed	30 mm/s	30 mm/s	30 mm/s	30 mm/s
Physical properties
Diameter	1.75 mm	1.75 mm	1.75 mm	1.75 mm
Density	1.24 g/cm³	1.24 g/cm³	1.24 g/cm³	1.24 g/cm³
Net weight	1000 g	750 g	750 g	750 g
Pack quantity	—	1	1	1
Finish	—	Standard	Standard	Standard
Thermal properties
Melt temperature	190 °C	200 °C	200 °C	200 °C
Composition & special properties
Abrasive (needs hardened nozzle)	No	No	No	No
HueForge & optics
TD (transmission distance)	1.8	1.8	1.8	1.8
TD confidence	low	low	low	low
TD source	filament-pass	filament-pass	filament-pass	filament-pass
Colour (hex)	#C9A227	#BB9572	#B58D6B	#B59473
Colour (CIELAB)	L 68 · a 3 · b 64	L 64 · a 9 · b 24	L 62 · a 11 · b 24	L 64 · a 8 · b 22
Storage & care
Moisture sensitivity	medium	medium	medium	medium
Drying temperature	40 °C	40 °C	40 °C	40 °C
Drying time	4 h	4 h	4 h	4 h
Moisture care	Store in dry box. Dry at 40°C for 4h if brittle.	Store in dry box. Dry at 40°C for 4h if brittle.	Store in dry box. Dry at 40°C for 4h if brittle.	Store in dry box. Dry at 40°C for 4h if brittle.
Scores & identifiers
SKU	—	010034	010036	030029