Compare Filaments
Rows where the filaments differ are marked and bolded.
| Spec | Printed Solid PSU NaturalPrinted Solid$125.00 → | 3DXTech ThermaX PSU — Black (1.75mm, 500g)3DXTech$75.00 → |
|---|---|---|
| Printing settings | ||
| Nozzle temperature | 190–220 °C | — |
| Bed temperature | 40–60 °C | — |
| Part cooling fan | 80–100 % | — |
| Max print speed | 60 mm/s | — |
| High-speed capable | No | No |
| Physical properties | ||
| Diameter | 1.75 mm | 1.75 mm |
| Density | 1.24 g/cm³ | — |
| Net weight | 500 g | 500 g |
| Pack quantity | — | 1 |
| Finish | — | Standard |
| Mechanical properties | ||
| Tensile strength (XY) | 50 MPa | — |
| Tensile modulus (XY) | 3500 MPa | — |
| Elongation at break (XY) | 6 % | — |
| Composition & special properties | ||
| Abrasive (needs hardened nozzle) | No | No |
| HueForge & optics | ||
| Colour (hex) | #5E56CD | #F4D4A3 |
| Colour (CIELAB) | L 43 · a 36 · b −61 | L 86 · a 4 · b 28 |
| Storage & care | ||
| Moisture sensitivity | 2 | — |
| Drying temperature | 45 °C | — |
| Drying time | 4 h | — |
| Scores & identifiers | ||
| FilaScore | 57 | — |
| SKU | PSU01UN200500NAT0 | PSU01UN200500BK01 |
| MPN | PSU01UN200500NAT0 | — |